Preventative Maintenance Program
These services are performed during a typical inspection and preventative maintenance visit.
Air Conditioning Equipment
- Lubricate fan bearings as needed.
- Inspect and adjust belts as needed.
- Inspect filters and clean if washable.
- Visually inspect equipment for signs of
refrigerant leaks . - Check indoor evaporator coil clean
as needed. - Check outdoor condenser coil clean
as needed. - Change batteries in thermostat if needed.
- Inspect and clean drain pan and drain line.
- Check electrical connections and
components - tighten loose connections. - Perform operational check and make operational log.
- Check zone dampers.
- Refrigerant pressures.
- Volts and Amps.
Oil and Gas Heating Equipment
- Lubricate fan and motor bearings as needed.
- Inspect and adjust belts as needed.
- Inspect filters and clean as needed.
- Visually inspect equipment.
- Remove nozzle and oil filter(oil).
- Check and adjust oil pump pressure(oil).
- Clean and adjust electrodes(oil).
- Check electrical connections and
components - tighten loose connections. - Check and lubricate water pumps as needed.
- Perform and log efficiency.
- Inspect venting.
- Check and lubricate water pumps as needed
if hydronic system. - Change batteries in thermostat if needed.
- Check zone dampers.
- Check and adjust gas pressure(gas).
- Check Combustion blower(gas).
- Adjust flame as needed(gas).
Humidification Equipment
- Replace atomizer nozzle or distributor pad
as needed. - Clean the water sump.
- Check operation.
Power Venting Equipment
- Check operation and safeties.
- Lubricate motor to manufacturer's specification.
Not included in the inspection and is billed as an extra
- Chemical used for cleaning evaporator coils and condenser coils.
- Replacing and electrical parts.
- Filters and fuel pumpss
- Cleaning of heat exchanger.
Written Report: will provide to customer representative upon completion of each regular inspection of emergency call.
Emergency Service: This coverage includes the priority scheduling for 24-hour emergency service for contract customers only.
Parts and Labor Discounts: Contract Customers who's accounts are current will receive a 5% discount on parts and labor for and service calls for covered equipment.
